Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
Blower Motor Resistor: Service and Repair
Auxiliary Climate Control
REMOVAL
1. If equipped, remove the third, fourth, and fifth bench seats as necessary.
2. If equipped, remove the trim panels.
^
Remove the left center bolster trim panel.
^
Remove the quarter trim rear upper panel.
^
Remove the lower rear body side trim panel.
3. Disconnect the heater blower motor switch resistor connector.
4. Remove the heater blower motor switch resistor.
1
Remove the screws.
2
Remove the heater blower motor switch resistor.
INSTALLATION
1. To install, reverse the removal procedure.
