Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
9. Remove the screw.
10. Disconnect the condenser to evaporator tube.
1
Remove the screw.
2
Disconnect the condenser to evaporator tube.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
11. Move the compressor discharge line isolator.
1
Remove the screw.
2
Move the compressor discharge line.
NOTE: On vehicles equipped with a 4.2L engine, carry out this step; all others proceed to Step 12.
