Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
Housing Assembly HVAC: Service and Repair
Disassembly and Assembly
DISASSEMBLY
1. Remove the floor/defrost door vacuum control motor.
1
Disconnect vacuum lines.
2
Remove the screws.
3
Lift the vacuum control motor off the door crank.
4
Remove the vacuum control motor.
2. Remove the floor/panel door vacuum control motor.
1
Disconnect the vacuum line.
2
Remove the screws.
3
Lift the vacuum control motor off the door crank.
4
Remove the vacuum control motor.
3. Remove the vacuum lines.
ASSEMBLY
1. To assemble, reverse the disassembly procedure.
