ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Camber and Caster Adjustment|Page 1712 > < Camber and Caster Adjustment|Page 1710
Page 1
background image

Alignment: Service and Repair
Toe Adjustment

Toe Adjustment 

1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the "straight forward" position by attaching a rigid link from the steering wheel to the brake

pedal.

3. Check the toe settings; follow the manufacturer's instructions.

4. Loosen the nuts.

^

Clean and lubricate the steering linkage and tie rod end threads.

5. Rotate the adjusting sleeves to obtain the correct toe setting.

6. Position the RH adjusting sleeve clamp opening downward within 45 degrees of vertical. Tighten the nuts.

Camber and Caster Adjustment|Page 1712 > < Camber and Caster Adjustment|Page 1710