ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Evaporative Emission Control Canister|Service Precautions|Page 3443 > < Evaporative Emission Control Canister|Service Precautions
Page 1
background image

Evaporative Emission Control Canister: Service and Repair

REMOVAL

1. Disconnect the battery ground cable.

WARNING:  THE EVAPORATIVE EMISSION SYSTEM CONTAINS FUEL VAPOR AND CONDENSED FUEL VAPOR.
ALTHOUGH NOT PRESENT IN LARGE QUANTITIES, IT STILL PRESENTS THE DANGER OF EXPLOSION OR FIRE.
DISCONNECT THE BATTERY GROUND CABLE FROM THE BATTERY TO MINIMIZE THE POSSIBILITY OF AN
ELECTRICAL SPARK OCCURRING, POSSIBLY CAUSING A FIRE OR EXPLOSION IF FUEL VAPOR OR LIQUID FUEL IS
PRESENT IN THE AREA.

2. Raise and support the vehicle.

3. Loosen the clamps and remove the evaporative emission purge outlet tube.

^

Disconnect the canister vent solenoid electrical connector.

4. Remove the canister and bracket assembly.

5. If necessary, remove the retainer by sliding the retainer off the bracket.

Evaporative Emission Control Canister|Service Precautions|Page 3443 > < Evaporative Emission Control Canister|Service Precautions