ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fuel Injector > < Technician Safety Information|Page 3542
Page 1
background image

Fuel Heater: Service and Repair

REMOVAL

1. Remove the fuel filter/water separator assembly.
2. Remove the fuel filter cap and element.

3. Remove the fuel filter heater thermostat.

1

Remove the screws.

2

Pull the thermostat out of the fuel filter/water separator housing.

4. Remove the fuel heater element.

1

Disconnect the electrical connector.

2

Remove the screws and the fuel heater.

INSTALLATION

1. To install, reverse the removal procedure.

WARNING:  CLEAN ALL THE FUEL RESIDUE FROM THE ENGINE COMPARTMENT. FAILURE TO DO SO CAN CAUSE
PERSONAL INJURY OR DAMAGE TO THE VEHICLE.

Fuel Injector > < Technician Safety Information|Page 3542