Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
Throttle Cable/Linkage: Service and Repair
Cable
REMOVAL
1. Hold the accelerator pedal in place and disconnect the accelerator cable from the accelerator pedal and shaft.
2. Remove the engine Air Cleaner (ACL) and outlet tube.
3. Remove the accelerator cable from the bulkhead.
From inside the vehicle, compress the retaining tabs on the cable end and remove the cable from the bulkhead.
4. Remove the accelerator cable from the throttle body cam.
5. Remove the accelerator cable from the accelerator cable bracket.
Compress the retaining tabs on the cable and remove the accelerator cable from the bracket.
