Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
Intake Air Temperature Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable. On vehicles equipped with dual batteries, refer to Battery.
CAUTION: Always disconnect the battery ground cable prior to working on the electronic engine controls.
2. Disconnect the electrical connector from the Intake Air Temperature (IAT) sensor.
3. Rotate the 1/4 turn counterclockwise and pull outward.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE: On vehicles equipped with dual batteries, refer to Battery for battery reconnect procedure.
