Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
Seat Belt Tensioner: Service and Repair
Safety Belt Pretensioner Disposal
Deployed
1. Dispose of the deployed safety belt pretensioner in the same manner as any other part to be scrapped.
WARNING: THE SAFETY BELT BUCKLE PRETENSIONER AND SAFETY BELT RETRACTOR PRETENSIONER ARE
PYROTECHNIC DEVICES. ALWAYS WEAR SAFETY GLASSES WHEN REPAIRING AN AIR BAG EQUIPPED VEHICLE AND
WHEN HANDLING A SAFETY BELT RETRACTOR PRETENSIONER OR SAFETY BELT BUCKLE PRETENSIONER.
Inoperative
WARNING:
^
THE SAFETY BELT BUCKLE PRETENSIONER AND SAFETY BELT RETRACTOR PRETENSIONER ARE PYROTECHNIC
DEVICES. ALWAYS WEAR SAFETY GLASSES WHEN REPAIRING AN AIR BAG EQUIPPED VEHICLE AND WHEN
HANDLING A SAFETY BELT BUCKLE PRETENSIONER OR SAFETY BELT RETRACTOR PRETENSIONER.
^
THE SAFETY BELT BUCKLE PRETENSIONER AND SAFETY BELT RETRACTOR PRETENSIONER ARE PYROTECHNIC
DEVICES. NEVER PROBE A PRETENSIONER ELECTRICAL CONNECTOR. DOING SO COULD RESULT IN PRETENSIONER
OR AIR BAG DEPLOYMENT AND COULD RESULT IN PERSONAL INJURY.
^
CARRY A LIVE SAFETY BELT RETRACTOR PRETENSIONER OR SAFETY BELT BUCKLE PRETENSIONER SO AS TO KEEP
FINGERS AND CLOTHING AWAY FROM MOVEABLE PARTS. THIS WILL REDUCE THE RISK OF INJURY IN THE EVENT
OF AN ACCIDENTAL DEPLOYMENT.
NOTE: All inoperative safety belt buckle pretensioners and safety belt retractor pretensioners have been placed on the Mandatory Return List. All
damaged safety belt buckle pretensioners and safety belt retractor pretensioners must be treated the same as any inoperative live safety belt buckle
pretensioner or safety belt retractor pretensioner being returned.
1. Remove the inoperative safety belt buckle pretensioner or safety belt retractor pretensioner from the vehicle.
2. Package and return the inoperative safety belt buckle pretensioner or safety belt retractor pretensioner to Ford Motor Company.
Scrapped Vehicle
REMOTE DEPLOYMENT
WARNING:
^
ALWAYS WEAR SAFETY GLASSES WHEN REPAIRING AN AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) VEHICLE
AND WHEN HANDLING AN AIR BAG MODULE, SAFETY BELT RETRACTOR PRETENSIONER, OR SAFETY BELT BUCKLE
PRETENSIONER. THIS WILL REDUCE THE RISK OF INJURY IN THE EVENT OF AN ACCIDENTAL DEPLOYMENT.
^
THE SAFETY BELT BUCKLE PRETENSIONER AND SAFETY BELT RETRACTOR PRETENSIONER ARE PYROTECHNIC
DEVICES. NEVER PROBE A PRETENSIONER ELECTRICAL CONNECTOR. DOING SO COULD RESULT IN PRETENSIONER
OR AIR BAG DEPLOYMENT AND COULD RESULT IN PERSONAL INJURY.
^
REMOTE DEPLOYMENT IS TO BE PERFORMED OUTDOORS WITH ALL PERSONNEL AT LEAST 6.1 METERS (20 FEET)
AWAY TO ENSURE PERSONAL SAFETY. DUE TO THE LOUD REPORT WHICH OCCURS WHEN THE SAFETY BELT
PRETENSIONER IS DEPLOYED, HEARING PROTECTION IS REQUIRED.
^
DO NOT POSITION THE SAFETY BELT BUCKLE PRETENSIONER OR SAFETY BELT RETRACTOR PRETENSIONER SO
THAT MOVEABLE PARTS CONTACT THE SUPPORT SURFACE, AS THE FORCES OF THE DEPLOYING PRETENSIONER
CAN CAUSE IT TO RICOCHET AND CAUSE PERSONAL INJURY.
1. Remove the safety belt buckle pretensioner assembly from the vehicle.
2. Cut and strip the wires near the electrical connector.