ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sensors and Switches - Instrument Panel > < A/C Cycling Switch
Page 1
background image

Refrigerant Pressure Sensor / Switch: Service and Repair
Pressure Cutoff Switch

REMOVAL

1. Disconnect the A/C pressure cut-off switch electrical connector.

2. Remove the A/C pressure cut-off switch.

INSTALLATION

1. To install, reverse the removal procedure.

^

Lubricate the O-ring seal with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C), or equivalent
meeting Ford specification WSH-M1C231-B.

Sensors and Switches - Instrument Panel > < A/C Cycling Switch