ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Battery Cable|Service Precautions|Page 5152 > < Battery Cable|Service Precautions|Page 5150
Page 3
background image

15. Remove the starter motor relay eyelet terminals.

1

Remove the B+ terminal rubber cap.

2

Remove the B+ terminal nut and disengage the wire.

3

Remove the enable terminal nut and disengage the wire.

16. Remove the primary ground nut.
17. Pull the primary negative battery cable out of the vehicle from the engine compartment.
18. Pull the battery cable harness from the bottom of the vehicle until removed.

INSTALLATION

1. Install the battery cable harness from under the vehicle until the primary positive terminal and starter motor relay connections are positioned.
2. Install the primary negative battery cable from the engine compartment until the terminal is positioned.

3. Install the primary ground terminal and nut. Install the starter motor relay B+ and enable terminals and nuts.

Battery Cable|Service Precautions|Page 5152 > < Battery Cable|Service Precautions|Page 5150