Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
Pitman Arm: Service and Repair
Sector Shaft Arm
Special Tool(s)
Special Tool(s)
Removal
NOTE: Replace the steering gear sector shaft arm if it is bent. If the steering gear sector shaft arm is bent, also check the drag link, steering tie rod,
tie rod adjustment sleeves and tie rod ball studs for signs of damage. Replace damaged steering linkage as required. Do not attempt to straighten the
steering gear sector shaft arm or any other steering linkage components.
1. Raise and support the vehicle.
2. Remove the steering sector shaft arm drag link castellated nut.
1
Remove and discard the cotter pin.
2
Remove the castellated nut.
3. Using the Pitman Arm Puller, separate the steering sector shaft arm drag link.