Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
2. NOTE: Make sure the fasteners are installed in their correct locations as noted during removal.
Install the extension housing.
1
Install the extension housing.
2
Install the eight bolts.
3
Install the stud.
3. Install the Vehicle Speed Sensor (VSS).
1
Install the VSS.
2
Install the bolt.
3
Connect the electrical connector.
4. CAUTION: Be sure not to raise the back of the transmission too high. If it makes contact with the underbody, damaged to the TSS sensor should
occur.
Install the transmission insulator and retainer and the bolts.
