ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Auxiliary Transmission Fluid Cooler|Page 4324 > < Auxiliary Transmission Fluid Cooler
Page 2
background image

Install a new inline transmission fluid filter (XC3Z-7B155-13A). If the vehicle was not equipped with an inline fluid filter, install a new inline
transmission fluid filter kit (XC3Z-7B155-AA) according to the instructions supplied with the kit. Carry out the transmission fluid cooler flow test
procedure to verify that there is correct fluid flow through the new inline fluid filter. 

5. Lower the vehicle.

All vehicles 
6. Install the radiator grille opening panel reinforcement. 

Vehicles with 4R100 transmission 

7. CAUTION: MERCON(R) Automatic Transmission Fluid is being replaced by MERCON(R) V as a service fluid, per TSB 06-14-4.

Fill the transmission with the specified type and quantity of transmission fluid. 
-

Use Motorcraft MERCON V Multi-Purpose (ATF) Transmission Fluid XT-5-QM or equivalent meeting MERCON V specifications.

Vehicles with 4R70W transmission 
8. Fill the transmission with the specified type and quantity of transmission fluid. 

All vehicles 
9. Check for leaks.

Auxiliary Transmission Fluid Cooler|Page 4324 > < Auxiliary Transmission Fluid Cooler