Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
12. Remove the accumulator body bolts and nuts.
13. CAUTION: Prevent the front of the valve body separator plate from sagging and displacing the check balls.
If the valve body separator plate is not being repaired:
1
Remove the bolt.
2
Install bolt into any case threaded bolt hole on the opposite end of the separator plate.
14. NOTE: Do not remove the lower-to-upper main control valve body assembly retaining bolts. Keep the main control valve bodies attached as an
assembly.
Remove the main control valve body.
1
Do not remove the lower-to-upper main control valve body bolts.
