Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
2. NOTE: Apply a small amount of petroleum jelly to each check ball prior to positioning them on the valve body separator plate.
Install eight rubber and one steel, EPC check balls.
3. NOTE: Apply petroleum jelly to the EPC check ball spring prior to installing it into the case.
Install the EPC check ball spring.
4. Position the valve body separator plate and the gaskets to the case carefully, to retain the check balls.
5. NOTE: The word UP stamped on the separator plate reinforcing plate must be visible when installed.
Install the separator plate reinforcing plate.
1
Install the separator plate reinforcing plate.
2
Install the retaining bolts.
6. Install the solenoid screen assembly by pushing it in and rotating it to lock.
