Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
Assembly
1. CAUTION: 118 ml (4 ounces) of the specified Additive Friction Modifier must be used in-the axle.
Prelubricate each steel clutch plate and soak all friction plates with Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford
specification EST-M2C118-A for at least 15 minutes.
2. CAUTION: Do not mix the differential clutch packs or shims from one side with the other.
Assemble the differential clutch packs (without the shims) on the respective differential side gears.
3. CAUTION: Select the correct mandrel to use with the Traction-Lok Differential Gauge.
Place the base portion of the special tool in a vise. Install the differential clutch pack and differential side gear (without the shim) on the gauge.
