Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
16. CAUTION: Make sure that the notches on the case flange and the anti-lock speed sensor ring are aligned.
Press the new anti-lock speed sensor ring and the ring gear on the differential case.
17. Install the ring gear bolts.
-
Apply Stud and Bearing Mount EOA-Z-19554-BA or equivalent meeting Ford specification WSK-M2G349-A1 to the ring gear bolts.
18. Check the torque required to rotate one differential side gear.
-
Mount the differential case and special tool in a vise.
-
The initial minimum break-away torque, if original clutch plates are used, must be within specification. The minimum rotating torque required
to keep the differential side gear turning with new clutch plates may vary.
19. Install the differential case.
