Econoline E550 V8-7.3L DSL Turbo VIN F (2002)
4. NOTE: Depending on the paint markings, there are two methods of indexing the driveshaft and the output shaft.
Install the, driveshaft.
1
Preferred method - align the factory-made paint marks on the output shaft and driveshaft and position the driveshaft in the transmission.
-
Alternate method - align the index-marks and position the driveshaft in the transmission.
5. CAUTION: Install the driveshaft with new bolts. If new bolts are not available, apply Threadlock and Sealer EOAZ-19554-AA or equivalent
meeting Ford specification WSK-M2G351-A5 to the threads of the original bolts.
CAUTION: The driveshaft flange yoke fits tightly on the pinion flange pilot. To make sure that the yoke seats squarely on the flange, tighten the
bolts evenly in a cross pattern as shown.
Position the driveshaft flange yoke on the pinion flange with the index marks aligned, and install the bolts.
