ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7123 > < Initial Inspection and Diagnostic Overview|Page 7121
Page 5
background image

(BK/GN), BJB face side.

-

Measure the voltage between the trailer tow RH stop/turn relay pin 5, BJB face side and the trailer tow RH stop/turn relay pin 1, circuit GD120
(BK/GN), BJB face side.

-

Is the voltage greater than 10 volts?

Yes

REPAIR circuit CAT06 (YE) (LH trailer stop/turn) or circuit CAT09 (GN) (RH trailer stop/turn) for an open. TEST the system for normal operation.

No

REPAIR circuit GD120 (BK/GN) for an open. TEST the system for normal operation.

-------------------------------------------------

Pinpoint Test AA: The Trailer Parking Lamps Are Inoperative

Trailer Lamps

Pinpoint Tests

Pinpoint Test AA: The Trailer Parking Lamps Are Inoperative

Refer to Wiring Diagram Set 11, Fuse and Relay Information for schematic and connector information.  See: Diagrams/Electrical Diagrams/Diagrams By
Number

Refer to Wiring Diagram Set 95, Trailer/Camper Adapter for schematic and connector information.  See: Diagrams/Electrical Diagrams/Diagrams By
Number

Normal Operation

Initial Inspection and Diagnostic Overview|Page 7123 > < Initial Inspection and Diagnostic Overview|Page 7121