Edge AWD V6-3.5L (2009)
4. Remove the 3 RH subframe-to-lower bumper nuts.
-
To install, tighten to 9 Nm (80 lb-in).
5. Remove the 3 LH subframe-to-lower bumper nuts and separate the lower bumper from the subframe.
-
To install, tighten to 9 Nm (80 lb-in).
6. Remove the 3 power steering tube bracket bolts from the RH side of the subframe and position the power steering tube aside.
-
To install, tighten to 9 Nm (80 lb-in).