Edge AWD V6-3.5L (2009)
Subframe Bushings - Rear Differential, Rear
Removal
NOTE: There are 2 Rear Drive Unit (RDU) bushings in the rear subframe, this procedure shows how to remove one bushing. The procedure for the
remaining RDU bushing is identical.
1. Remove the RDU.
2. NOTE:
-
Make sure the Rear Drive Unit (RDU) Bushing Remover/Installer 204-617/2 is positioned with the larger opening toward the bushing to act as
the receiver cup.
-
Make sure the arrow on the special tool is pointed toward the rear subframe when removing the bushing.
Assemble the Rear Drive Unit (RDU) Bushing Remover/Installers to the rear subframe and press out the bushing.
Installation
