Edge AWD V6-3.5L (2009)
occur.
With the LH locking button released, remove the LH electrical connector from the passenger air bag module.
25. Using a small screwdriver as shown, lift up and release the locking button on the RH passenger air bag module electrical connector.
26. NOTICE: Do not pull the passenger air bag module electrical connector out by the locking button. Damage to the locking button may
occur.
With the RH locking button released, remove the RH electrical connector. Remove the passenger air bag module from the glove compartment
opening.
All vehicles
27. From under the rear of the front passenger seat, slide and disengage the passenger seat side air bag module electrical connector locking clip, and
then release the tab and disconnect the passenger seat side air bag module electrical connector.
28. Remove the passenger side D-pillar trim panel.
29. NOTICE: Do not pull the passenger safety canopy module electrical connector out by the locking button. Damage to the locking button
may occur.
With the locking button released, remove the electrical connector from the passenger safety canopy module.
30. Remove the driver side D-pillar trim panel.
31. NOTICE: Do not pull the driver safety canopy module electrical connector out by the locking button. Damage to the locking button may
occur.
With the locking button released, remove the electrical connector from the driver safety canopy module.
