Edge AWD V6-3.5L (2009)
Door Lock Cylinder: Service and Repair
Door Lock Cylinder
Removal and Installation
NOTE: Individual lock cylinders are repaired by discarding the inoperative cylinder and building a new lock cylinder using the appropriate lock repair
package. The lock repair package includes a detailed instruction sheet to build the new lock cylinder to the current key code of the vehicle.
1. Remove the exterior door handle. For additional information, refer to Exterior Door Handle See: Doors, Hood and Trunk/Doors/Front Door/Front
Door Handle/Front Door Exterior Handle/Service and Repair/Exterior Door Handle.
2. NOTE: Upon installation, make sure that the d-slot in the lock cylinder lines up with the d-slot in the lock cylinder lever.
Using a suitable tool, release the retaining tab and remove the front door lock cylinder.
3. To install, reverse the removal procedure.
