Edge AWD V6-3.5L (2009)
8.
Apply foam strip along surface taking care that it is close to the rearward edge but not past it. (Figure 2)
9.
Apply even pressure along entire foam strip, starting at one end and proceeding to the opposite end. Make sure to per[orm this action twice to
ensure there is no air trapped between the gasket and spoiler. (Figure 2)
10. Install spoiler following (WSM), Section 501-08.
Parts Block
NOTE
OBTAIN THE FOLLOWING PARTS LOCALLY
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
090603A
2007-2009 Edge, MKX:
0.8 Hr.
Replace Foam Gasket,
Includes Time to Remove
And Install Spoiler (Do Not
Use With P49D)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
7044210
33
Disclaimer