Edge AWD V6-3.5L (2009)
2. NOTE: Make sure the brake disc is clean and free of any foreign material.
Install the brake disc.
3. Position the brake caliper and anchor plate assembly and the brake caliper anchor plate bolts.
-
Tighten to 133 Nm (98 lb-ft).
4. Install the wheel and tire.
-
Apply brakes several times to verify correct brake operation.
Brake Disc Shield
Brake Disc Shield
Removal
1. Remove the wheel bearing and wheel hub.
2. Index-mark the brake disc shield to the wheel knuckle, then align the new brake disc shield to the existing shield and transfer the index mark.
