Edge AWD V6-3.5L (2009)
106. NOTE: Cylinder head camshaft bearing caps are numbered to verify that they are assembled in their original positions.
Remove the bolts and the LH camshaft bearing caps.
-
Remove the LH camshafts.
RH camshafts
107. Compress the RH secondary timing chain tensioner and install a suitable lockpin to retain the tensioner in the collapsed position.
108. NOTE: The VCT bolt and the exhaust camshaft bolt must be discarded and new ones installed. However, the exhaust camshaft washer is reusable.
Remove and discard the RH VCT assembly bolt and the RH exhaust camshaft sprocket bolt.
-
Remove the RH VCT assembly, secondary timing chain and the RH exhaust camshaft sprocket as an assembly.
109. Remove the Camshaft Holding Tool from the RH camshafts.