Edge AWD V6-3.5L (2009)
62. Install the 4 engine mount nuts.
-
Tighten to 63 Nm (46 lb-ft).
63. Install the engine mount brace, the nut and the bolt.
-
Tighten to 20 Nm (177 lb-in).
64. Install the transaxle support insulator bracket, the 3 nuts and the bolt.
-
Tighten the 3 nuts to 63 Nm (46 lb-ft).
-
Tighten the bolt to 80 Nm (59 lb-ft).
65. Install the transaxle support insulator through bolt and nut.
-
Tighten to 175 Nm (129 lb-ft).
66. If equipped, connect the oil cooler coolant hoses.
