Edge AWD V6-3.5L (2009)
67. Using the Powertrain Lift, raise the subframe into the installed position.
68. Install the 2 middle subframe nuts.
-
Tighten to 133 Nm (98 lb-ft).
69. Install the 2 front subframe nuts.
-
Tighten to 133 Nm (98 lb-ft).
70. Position the subframe support brackets in place and loosely install the 4 bolts.
71. Install the 2 rear subframe bracket nuts.
-
Tighten to 133 Nm (98 lb-ft).