Edge AWD V6-3.5L (2009)
82. Connect the power steering cooler hose.
83. NOTE: Lubricate the engine oil filter gasket with clean engine oil prior to installing the oil filter.
Install a new engine oil filter.
-
Tighten to 5 Nm (44 lb-in) and then rotate an additional 180 degrees.
84. Connect the 2 transmission fluid cooler tubes.
85. Install the 2 secondary latches onto the transmission fluid cooler tubes.
86. Install the LH inner splash shield.
87. Install the radiator splash shield, the 3 pin-type retainers and the 7 screws.