Edge AWD V6-3.5L (2009)
94. Connect the 2 engine wiring harness electrical connectors.
-
Attach the electrical connector to the LH valve cover.
95. Connect the fuel hose routing clip to the transaxle stud.
96. Connect the fuel supply tube.
97. Connect the hose to the power steering reservoir.
98. Connect the A/C suction tube fitting.
-
Install the safety clip onto the A/C fitting.
99. Using a new O-ring seal, connect the A/C pressure tube fitting and install the nut.
-
Tighten to 8 Nm (71 lb-in).
