Edge AWD V6-3.5L (2009)
105. Connect the upper Evaporative Emission (EVAP) tube quick connect coupling. to the purge valve.
106. Connect the vacuum hose to the upper intake manifold.
107. Install the ground wire and the bolt.
-
Tighten to 10 Nm (89 lb-in).
-
Attach the 2 wiring harness retainers to the cowl.
108. Connect the power feed to the battery terminal and install the nut.
-
Tighten to 8 Nm (71 lb-in).
109. Connect the battery harness electrical connector.
110. Install the battery tray.