Edge AWD V6-3.5L (2009)
2. Install the 3 thermostat housing-to-lower intake manifold bolts.
-
Tighten to 10 Nm (89 lb-in).
3. Install the ACL assembly.
4. Install the fuel rail.
5. Fill and bleed the cooling system.
2. Install the 3 thermostat housing-to-lower intake manifold bolts.
-
Tighten to 10 Nm (89 lb-in).
3. Install the ACL assembly.
4. Install the fuel rail.
5. Fill and bleed the cooling system.