Edge AWD V6-3.5L (2009)
Condenser HVAC: Description and Operation
Air Conditioning
A/C Condenser
NOTE: The A/C condenser for this vehicle is produced from the factory with a receiver/drier desiccant bag installed in the integrated receiver/drier.
This receiver/drier desiccant bag may become contaminated with moisture if the A/C condenser is not installed for an extended period of time. Since it
cannot be determined how much time has elapsed between production and installation of the unit as a service part, the receiver/drier desiccant bag must
be removed and replaced with the separate receiver/drier desiccant bag, which is supplied together with the A/C condenser service part kit.
The A/C condenser is an aluminum fin-and-tube design heat exchanger located in front of the vehicle radiator. It cools compressed refrigerant gas by
allowing air to pass over fins and tubes to extract heat and by condensing gas to liquid refrigerant as it is cooled.
The receiver/drier is incorporated onto the LH side of the A/C condenser. The receiver/drier desiccant bag is a separate component and can be separately
removed and installed with the A/C condenser removed from the vehicle.
