Edge AWD V6-3.5L (2009)
ON THE CORRECT WIRE WHEN THE HEADLIGHT SWITCH IS TURNED TO PARKLAMPS ON, THEN SHOW GROUND WHEN THE
HEADLIGHT SWITCH IS OFF.
4.
Validate that the repair was successful by activating the remote start function of the vehicle. Press and hold remote start button for two (2) seconds.
The parklamps should flash with the horns and then stay illuminated for the duration of the remote start.
5.
Replace the headlight switch following WSM, Section 417-01.
6.
Verify replacement headlight switch functions properly through all switch positions.
7.
Reinstall interior trim pieces.
NOTE
CODE THE CLAIM AGAINST CAUSAL PART # 19G364 AND USE PROGRAM CODE "ACC" FOR CLAIM SUBMISSION.
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
090304A
2009 Edge, MKX: Replace
0.5 Hr.
The Headlight Switch,
Includes Time To Relocate
The Wire From The
Remote Start Module (Do
Not Use With 11654A,
14200A, 13208A)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
19G364
X7
Disclaimer