Edge AWD V6-3.5L (2009)
engine may occur. If the Motorcraft(R) Engine Cooling System Cleaner VC-11/water mixture temperature EXCEEDS 150° F (65° C), the
heater blower motor can be turned ON to reduce the mixtures temperature If the Motorcraft(R) Engine Cooling System Cleaner VC-11/water
mixture temperature STILL EXCEEDS 150° F (65° C), the engine MUST be turned OFF and the key left ON. The key MUST remain on for
the operation of the heater blower motor to allow the engine to cool down.
Continue the flush using the flush tool kit pump, circulating the Motorcraft(R) Engine Cooling System Cleaner VC-11/water mixture through
the cooling system.
NOTICE:
Do NOT allow the degas bottle to run low or empty This will allow air to enter the cooling system and will cause an overheating condition and
prevent the Motorcraft(R) Engine Cooling System Cleaner VC-11/water mixture from circulating through the entire engine and cooling system.
(NEW!)
NOTE:
Allow the engine to idle for a MINIMUM of 2 hours The Motorcraft(R) Engine Cooling System Cleaner VC11/water mixture temperature MUST
remain between 135° F (57° C) to 150° F (65° C)
NOTE:
To control any odor from the Motorcraft(R) Engine Cooling System Cleaner VC-11/water mixture during the flush install a shop exhaust hose into
the lid of the tool kit bucket.
