Edge AWD V6-3.5L (2009)
Removal
All vehicles
NOTICE: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure may result
in major service expense. New parts must be installed with the same part numbers or equivalent part, if replacement is necessary. Do not use a
replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure correct
retention of these parts.
1. Remove the wheel and tire.
2. NOTICE: Do not allow the brake caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.
Remove the 2 anchor plate bolts and position the brake caliper and anchor plate assembly aside.
-
Support the brake caliper and anchor plate assembly using mechanic's wire.
3. Remove the brake disc.
All-Wheel Drive (AWD) vehicles
4. NOTE: Do not discard the inner nut at this time.
Remove the outer and inner halfshaft nuts.
-
Discard the outer nut.
