Edge AWD V6-3.5L (2009)
Transmission Position Switch/Sensor: Service and Repair
6F50
Digital Transmission Range (TR) Sensor
Removal
NOTICE: The use of any transmission fluid other than what is recommended for this transaxle will cause transaxle damage. Refer to the
Material specification and/or the transmission fluid level indicator for the correct fluid. Use only clean transmission fluid designated for this
transaxle and torque converter being serviced.
NOTICE: Do not mix Mercon(R) V or Mercon(R) LV transmission fluid. This may cause erratic shift feel, erratic shift timing and/or
transmission failure.
NOTE: Transmission fluid application:
-
Early build vehicles require MERCON(R) V
-
Late build vehicles require MERCON(R) LV
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the Mass Air Flow (MAF) sensor electrical connector and the wiring harness fastener from the Air Cleaner (ACL) assembly.
3. Disconnect the brake booster vacuum hose from the ACL outlet pipe.
4. Disconnect the engine breather from the ACL assembly.
