Edge AWD V6-3.5L (2009)
19. Tighten the transmission fluid cooler tube fitting.
-
Tighten to 25 Nm (18 lb-ft).
20. NOTICE: Make sure that when installing the manual control lever it is fully seated onto the manual control lever shaft. Damage to the
manual control lever shaft will occur and the lever will come loose.
NOTICE: Make sure to hold the manual control lever while tightening the manual control lever nut or damage to the manual control
lever and park components will occur.
Install the manual control lever and the nut.
-
Tighten to 18 Nm (159 lb-in).
21. Install the transmission fluid filler tube and the nut.
-
Tighten to 11 Nm (97 lb-in).
22. Install the transmission fluid level indicator.
23. Route the coolant hoses to the correct position on the transmission fluid filler tube.
