Edge AWD V6-3.5L (2009)
5. Push the locking mechanism outward and release the tube.
6. Remove the quick connect coupling from the tube.
Connect - Type II
1. NOTE: Apply clean engine oil to the end of the tube and quick connect coupling O-ring seals.
Install the quick connect coupling onto the tube until it is fully seated.
2. Depress the locking mechanism until it is flush with the quick connect coupling housing and is fully seated onto the tube.
3. Rotate the primary locking tab on the retainer clip to the closed position.
4. Pull on the quick connect coupling and the tube to make sure it is securely fastened.