Edge AWD V6-3.5L (2009)
2. Adjust the spark plug gap as necessary.
3. NOTICE: Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.
Install the 6 spark plugs.
-
Tighten to 15 Nm (133 lb-in).
4. NOTE: Apply a small amount of dielectric grease to the inside of the ignition coil-on-plug boots before attaching to the spark plugs.
Install the 6 ignition coil-on-plugs and the 6 bolts.
-
Tighten to 7 Nm (62 lb-in).
5. Connect the 6 ignition coil-on-plug electrical connectors.
RH side
6. Install the upper intake manifold.
LH side
7. Position and connect the crankcase vent tube quick connect coupling to the valve cover fitting.