Edge AWD V6-3.5L (2009)
Inertia Fuel Shutoff Switch: Service and Repair
Inertia Fuel Shutoff (IFS) Switch
Removal and Installation
1. Remove the LR quarter trim panel.
2. Remove the 3 rivets and the Inertia Fuel Shutoff (IFS) switch shield.
3. Disconnect the IFS switch electrical connector.
4. NOTICE: Do not overtighten the fasteners or damage to the switch will occur.
Remove the 2 bolts and the IFS switch.
-
To install, tighten to 2 Nm (18 lb-in).
5. To install, reverse the removal procedure.
