ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Turbine Shaft Speed (TSS) Sensor|Page 3901 > < Turbine Shaft Speed (TSS) Sensor|Page 3899
Page 12
background image

23. Route the coolant hoses in the transmission fluid filler tube.

24. Place the manual control lever in DRIVE.

1. Rotate the manual control lever clockwise until it stops.

2. Rotate the manual control lever counterclockwise one detent until it stops.

25. Unlock the selector lever cable adjuster by sliding the locking tab over.

26. Slide the cable end forward or backward to align it with the manual control lever.

27. With the adjuster locking tab released, connect the selector lever cable end to the manual control lever.

Turbine Shaft Speed (TSS) Sensor|Page 3901 > < Turbine Shaft Speed (TSS) Sensor|Page 3899