Edge AWD V6-3.5L (2009)
3. Remove the 2 passenger air bag module bolts from the cross-car beam bracket.
4. NOTICE: Do not handle the passenger air bag module by grabbing the edges of the trim cover. Damage to the air bag module may occur.
Through the glove compartment opening, release the LH side passenger air bag cover clips. Then release the forward-most passenger air bag cover
clips and separate the passenger air bag cover and passenger air bag module from the instrument panel.
-
Push firmly to release the air bag cover clips.
5. Using a small screwdriver as shown, lift up and release the locking button on the RH passenger air bag module electrical connector.
6. NOTICE: Do not pull the passenger air bag module electrical connector out by the locking button. Damage to the locking button may
occur.
With the RH locking button released, remove the RH electrical connector.
7. Using a small screwdriver as shown, lift up and release the locking button on the LH passenger air bag module electrical connector.
8. NOTICE: Do not pull the passenger air bag module electrical connector out by the locking button. Damage to the locking button may
occur.
With the LH locking button released, remove the LH electrical connector and remove the passenger air bag module.
Installation
1. NOTICE: Do not install the passenger air bag module electrical connectors by the locking buttons. Damage to the locking buttons may
occur.
NOTICE: The passenger air bag module electrical connector locking buttons must be in the released position when the connector is being
installed or connector damage may occur.
NOTICE: The passenger air bag module electrical connectors are unique and cannot be reversed when connected to the passenger air
bag module. Match the electrical connector key to the keyway in the passenger air bag module. Do not force the electrical connectors into
the passenger air bag module. Damage to the connector or component may occur.
NOTE: RH shown, LH similar.
With the locking buttons released, install the 2 passenger air bag module electrical connectors fully into the passenger air bag module and seat the
locking buttons.
