Edge AWD V6-3.5L (2009)
5. NOTE: When installing the side plate to the seat track rail, 2 new OCS weight sensor nuts must be installed.
Install the 2 new OCS weight sensor bolt nuts to the seat track rail.
-
Tighten to 33 Nm (24 lb-ft).
6. Install the seat adjuster handle to the seat track rail.
7. Engage the seat adjuster handle spring.
8. Install the 2 rear cross brace screws.
-
Tighten to 5 Nm (44 lb-in).
9. Install the 2 front cross brace screws.
-
Tighten to 5 Nm (44 lb-in).