Edge AWD V6-3.5L (2009)
16. Inspect the transaxle case to make sure that the transmission fluid cooler tube seal and backing ring were removed with the transmission fluid
cooler tube and are not stuck in the transaxle case. If the transmission fluid cooler tube seal or backing ring are stuck in the transaxle case, remove
the seal and backing ring.
17. Disconnect the transaxle electrical connector.
18. Remove the transmission fluid cooler tube bracket nuts, pull the transmission fluid cooler thermal bypass valve straight up and position it aside.
19. NOTE: Note the location of the studbolts for assembly.
Remove the bolts and the main control cover.
20. Disconnect the Transmission Range (TR) sensor electrical connector.
1. Slide the lock over.
2. Press the tab and disconnect the connector.
