Edge AWD V6-3.5L (2009)
Install the manual control lever and the nut.
-
Tighten to 18 Nm (159 lb-in).
18. Inspect the transmission fluid cooler tube backing ring and seal for damage and install a new backing ring or seal if necessary. Lubricate the
transmission fluid cooler tube seal with clean transmission fluid and install the backing ring and seal on the transmission fluid cooler tube.
19. Position the transmission fluid cooler tube in place and install a new bolt.
-
Tighten to 9 Nm (80 lb-in).
20. Tighten the transmission fluid cooler tube fitting.
-
Tighten to 25 Nm (18 lb-ft).
21. Install the transmission fluid filler tube and the nut.
-
Tighten to 11 Nm (97 lb-in).
22. Install the transmission fluid level indicator.
