Edge AWD V6-3.5L (2009)
shorted at the starter motor battery terminal, the tool can quickly heat enough to cause a skin burn. Failure to follow this instruction may result in serious
personal injury.
1. Disconnect the battery ground cable.
2. Remove the Air Cleaner (ACL).
3. Disconnect the transmission shift cable and adjustment lock from the transmission manual control lever.
4. Disconnect the transmission shift cable rotating slide snap and position aside the transmission cable.
5. Remove the nut and the transmission manual control lever.
-
To install, tighten to 18 Nm (159 lb-in).
6. Remove the starter motor terminal cover.
7. Remove the starter motor solenoid battery cable nut.
-
To install, tighten to 12 Nm (106 lb-in).
8. Remove the starter motor solenoid wire nut.
-
To install, tighten to 5 Nm (44 lb-in).
9. Detach the wiring harness retainer from the starter motor stud bolt and position the wiring harness aside.
10. Remove the starter motor bolt, stud bolt and the starter.
-
To install, tighten to 27 Nm (20 lb-ft).
11. To install, reverse the removal procedure.
