Edge AWD V6-3.5L (2009)
16. NOTE:
-
Align the front subframe index marks to the body index marks made during removal.
-
During installation, the subframe brackets are loosely installed with the support bracket bolts. Tighten the rear subframe nuts prior to
tightening the support bracket bolts.
Remove the 2 nuts, 4 bolts and the subframe support brackets.
-
Discard the nuts and bolts.
-
To install, tighten the nuts to 133 Nm (98 lb-ft).
-
To install, tighten the bolts to 90 Nm (66 lb-ft).
17. Remove the 2 front subframe nuts.
-
Discard the nuts.
-
To install, tighten to 133 Nm (98 lb-ft).
18. Remove the 2 middle subframe nuts and remove the subframe.
-
Discard the nuts.
-
To install, tighten to 133 Nm (98 lb-ft).