ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Wheels - Front/Rear Wheel Clicking/Creaking Noises|Page 5769 > < Tire Pressure Monitoring System (TPMS) Sensor|Page 5760
Page 1
background image

Wheels: Customer Interest
Wheels - Front/Rear Wheel Clicking/Creaking Noises

TSB 09-7-1

04/20/09

CLICKING/CREAKING NOISE - FRONT OR REAR 20
INCH WHEELS - SLOW SPEED BELOW 5 MPH (8
KM/H) - BUILT ON OR BEFORE 1/28/2009

FORD:
2008-2009 Edge

This article supersedes TSB 08-7-2 to update Service Procedure and Part List.

ISSUE
Some 2008-2009 Edge vehicles built on or before 1/28/2009 and equipped with 20 inch chrome clad cast aluminum wheels may exhibit a noise coming
from the front or rear wheel(s) at speeds lower than 5 MPH (8 Km/h). The noise may be coming from the chrome cladding that attaches to the rim.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

NOTE

IF THE SOURCE OF NOISE IS NOT FROM THE WHEEL, FOLLOW NORMAL WORKSHOP MANUAL PROCEDURES.

1.

Verify the noise is coming from the wheel(s). The wheel noise (clicking/creaking) is worse at higher temperatures and during slow speed
maneuvers.

2.

Replace wheel(s) making the described noise with updated service parts for 20" chrome (bright) clad cast aluminum wheel. Refer to Workshop
Manual 204-04 for wheel replacement. Proceed to Step 3.

Wheels - Front/Rear Wheel Clicking/Creaking Noises|Page 5769 > < Tire Pressure Monitoring System (TPMS) Sensor|Page 5760